- Видео 372
- Просмотров 2 346 370
QC GUY
США
Добавлен 7 авг 2016
Welcome to my channel! My name is Chris and here on my channel I do interactive livestreams with my viewers and I seek out the products I believe in and want to share with you. Every product has a down side or flaw and that is never hidden here on my channel. QC stands for quality control so flaws or short cuts don't go without mention.
I love tech and know tech which separates me from other channels that just use the word tech.
My current platform I hope to stick with is drones, electric vehicles (EV's) and laser engravers/cutters.
This channel supports Children's Hospital free care fund charities so please use my links & donations to my PayPal.
www.paypal.com/paypalme/cswade88
Thanks!
Need your drone repaired? I do that too!
Email me @ qcguy.chris@gmail.com and I will get you fixed up and back in the air at a minimal cost compared to others with 100% quality and care for your equipment. If it's broke I can fix it!
I love tech and know tech which separates me from other channels that just use the word tech.
My current platform I hope to stick with is drones, electric vehicles (EV's) and laser engravers/cutters.
This channel supports Children's Hospital free care fund charities so please use my links & donations to my PayPal.
www.paypal.com/paypalme/cswade88
Thanks!
Need your drone repaired? I do that too!
Email me @ qcguy.chris@gmail.com and I will get you fixed up and back in the air at a minimal cost compared to others with 100% quality and care for your equipment. If it's broke I can fix it!
Autel Nano - Autel Nano Plus - Leg Replacement
Autel Nano - Autel Nano Plus leg replacement how to video should you need it. This is normally a very easy repair but you must be very careful removing the bottom cover so yours doesn't end up like this one.
I will fix it for you: qcguy.chris@gmail.com
Contributions to my channel are always appreciated...Thank You 😉
PayPal: www.paypal.com/paypalme/cswade88
Venmo: www.venmo.com/u/Christopher-Wade-53
I will fix it for you: qcguy.chris@gmail.com
Contributions to my channel are always appreciated...Thank You 😉
PayPal: www.paypal.com/paypalme/cswade88
Venmo: www.venmo.com/u/Christopher-Wade-53
Просмотров: 1 709
Видео
DJI Mini All Models - Mid Frame Replacement - Complete Teardown
Просмотров 6 тыс.Год назад
DJI Mini all models will have the same mid frame replacement procedure for the most part but the part is different so get the right part for your model. This is a complete teardown with soldering and removing delicate parts so it may not be something you want to do. If so you can send it to me and I will fix it for you at a very reasonable price. Hope the video help! I will fix it for you: qcgu...
DJI Mini 2 & DJI Mini 2 SE - How to Replace Rear Arm
Просмотров 15 тыс.Год назад
DJI Mini 2 & DJI Mini 2 SE tutorial for how to replace the right rear arm. Same replacement procedure for the left rear arm as well for Mini 2 and Mini 2 SE. The parts used in this video are factory DJI replacement parts that fit the Mini 2 and Mini 2 SE. Drone repair inquiries: qcguy.chris@gmail.com A small simple contribution is always appreciated...Thank You 😉 PayPal: www.paypal.com/paypalme...
xTool D1 Pro 20 watt - Pros - Cons & Tips / First Look
Просмотров 352Год назад
My first look impressions of the xTool D1 Pro 20 watt along with some starter tips, pros & cons which mainly fall with the chuck. I'm not crazy about the chuck and will explain why along with some brief clips demonstrating my burns good and bad. This channels commissions go towards Children's Hospitals free care funding. 💝 Get yours here: www.xtool.com/products/xtool-d1-pro-20w-higher-accuracy-...
Hubsan Zino Mini & Exo Mini Gimbal Calibration App Tool
Просмотров 1,5 тыс.Год назад
Exo & Hubsan Mini both will have the same error codes. Gimbal error code 0x0080 is the most common code when the IMU gets way out of whack or when you are installing a new gimbal. The Hubsan gimbal calibration app tool is what you need to resolve this code and others. It is a buggy app but it can get you out of a pinch with some patients. Reminder: Exo Mini Pro and Hubsan Mini Pro are the same ...
Hubsan Zino Mini SE & Pro - How To Replace Leg / Arm
Просмотров 1,7 тыс.Год назад
Finding parts is the biggest challenge in fixing your Hubsan Zino Mini SE & Pro. Here is my video showing you how to replace the leg / arm. Frankendrone in this case! I fix drones and sometimes the only option is to use what you have. Drone repair email me: qcguy.chris@gmail.com
DJI Avata Hard Case - Best Affordable Cases. (Giveaway)
Просмотров 1,1 тыс.Год назад
Anyone can win these DJI Avata hard cases! You do have to be a subscriber to win and you do have to own a DJI Avata. I picked 3 hard cases made for the Avata and will be giving away 2 cases. First in the video I explain how to enter and I hope you do enter followed by my review of all 3 cases as a real user packing them full of my crap. Case #1 FPVTOSKY amzn.to/3EtmAu3 Case #2 SKYREAT amzn.to/3...
DroneMask 2 - Goggles for all Drones - Use as Pilot or a Co-Pilot
Просмотров 2,6 тыс.Год назад
You wanted more so here's the new DroneMask 2 FPV Goggles. The new Drone Mask version 2 have the changes you wanted in these FPV Goggles. You can also use these as Co-Pilot or Audience Mode for a second person to ride along on your DJI FPV or Avata flights. These will work with any app based drone which means popular models like Autel, DJI, Skydio, Hubsan, Fimi and Exo can all use these for a t...
DJI Avata ~ Lost Signal & Lost Avata Cinewhoop / FPV Flyaway?
Просмотров 2,2 тыс.Год назад
DJI Avata ~ Lost Signal & Lost Avata Cinewhoop / FPV Flyaway?
DJI Mini 3 Pro - Wide Angle & Anamorphic Lens with ND Filters
Просмотров 1,9 тыс.Год назад
DJI Mini 3 Pro - Wide Angle & Anamorphic Lens with ND Filters
New DJI Firmware Updates for Air 2S & Mini 3 Pro - Served with Remote ID!
Просмотров 8 тыс.Год назад
New DJI Firmware Updates for Air 2S & Mini 3 Pro - Served with Remote ID!
Anker 555 PowerHouse - Portable Power Station
Просмотров 3,1 тыс.Год назад
Anker 555 PowerHouse - Portable Power Station
DJI Avata - Tree Surfing the Fall Colors w/ Freewell Filters
Просмотров 967Год назад
DJI Avata - Tree Surfing the Fall Colors w/ Freewell Filters
DroneMask - DJI Mini 2 FPV Mode Flight Footage with Goggles
Просмотров 11 тыс.Год назад
DroneMask - DJI Mini 2 FPV Mode Flight Footage with Goggles
DJI Mini 3 Pro vs. Autel Nano Plus - Flight Footage Comparison
Просмотров 2,8 тыс.Год назад
DJI Mini 3 Pro vs. Autel Nano Plus - Flight Footage Comparison
DJI Osmo Action 2 - Freewell ND Filters & Accessories
Просмотров 350Год назад
DJI Osmo Action 2 - Freewell ND Filters & Accessories
DJI RC - Record Voice Audio to RC with DJI Mic
Просмотров 17 тыс.Год назад
DJI RC - Record Voice Audio to RC with DJI Mic
EXO Blackhawk 2 Pro - Flight Footage & First Impressions
Просмотров 2,8 тыс.Год назад
EXO Blackhawk 2 Pro - Flight Footage & First Impressions
Who is Exo Drone? - Exo Blackhawk 2 Pro & Exo Mini Pro
Просмотров 3,4 тыс.Год назад
Who is Exo Drone? - Exo Blackhawk 2 Pro & Exo Mini Pro
DJI Mini 3 Pro - Beginner Camera Settings & Freewell Filter Giveaway
Просмотров 1,4 тыс.Год назад
DJI Mini 3 Pro - Beginner Camera Settings & Freewell Filter Giveaway
DJI Mini 3 Pro SKYREAT Case & Accessories - PLUS ND Filter Giveaway
Просмотров 3 тыс.Год назад
DJI Mini 3 Pro SKYREAT Case & Accessories - PLUS ND Filter Giveaway
Mini 3 Pro vs. Mini 2 - Long Range Test Ends In Forced Landing & Find My Drone
Просмотров 16 тыс.Год назад
Mini 3 Pro vs. Mini 2 - Long Range Test Ends In Forced Landing & Find My Drone
Urtopia Carbon Fiber Smart E-Bike - Unboxing Setup & First Ride Experience
Просмотров 2,1 тыс.2 года назад
Urtopia Carbon Fiber Smart E-Bike - Unboxing Setup & First Ride Experience
DJI Mini 3 Pro Range Test - Two Reasons For Your Poor Signal & Range
Просмотров 10 тыс.2 года назад
DJI Mini 3 Pro Range Test - Two Reasons For Your Poor Signal & Range
DJI Mini 3 Pro - Close Up OA Testing & Hand Launch & Demonstrations
Просмотров 3,6 тыс.2 года назад
DJI Mini 3 Pro - Close Up OA Testing & Hand Launch & Demonstrations
DJI Mini 3 Pro with DJI RC - Poor Signal? No Range?
Просмотров 6 тыс.2 года назад
DJI Mini 3 Pro with DJI RC - Poor Signal? No Range?
DJI Mini 3 Pro - Unboxing Review (USA)
Просмотров 2,1 тыс.2 года назад
DJI Mini 3 Pro - Unboxing Review (USA)
Autel Evo Nano Plus - Search & Recovery (SAR)
Просмотров 4,3 тыс.2 года назад
Autel Evo Nano Plus - Search & Recovery (SAR)
Autel Evo Nano Plus - Range Test Standard & Ludicrous Modes
Просмотров 11 тыс.2 года назад
Autel Evo Nano Plus - Range Test Standard & Ludicrous Modes
👍🏽😂😂😂 Great info and video
what screw driver is required to open to case?
If I send you my zino.. can you fix it?
I don’t know what’s wrong with it but yes I can fix anything and have every part for that drone. Email me qcguy.chris@gmail.com
You talking nonsense bro.. it usnt a dam copy,its a partnership,u dumb f..k
Thank you. Is there a tool to diagnose transmitter joysticks?
I cant get mine to connect to my new controller at all, I followed this to the T but mine just keeps beeping for like 60 seconds then nothing. the app won't update any firmware either I got like 1019 for RC and 1019C for RC relay and my camera and vision show as N/A. it feels like fimi intentionally messed up the 2020 to get people to buy the 2022.
did they kill support for the 2020 fimi x8 se? the app runs on my android I got picture from my drone camera but nothing else works the lights are red on the remote for bad connection, I go into firmware and my RC firmware is 1019 and my RC relay firmware is 1019C but theres no updates except for a no fly zone thing but when I click update it just says something about no camera, which my camera firmware shows as N/A
Chris, have you ever identified where the speaker is located, and how one might go about removing it or disabling the start up beeps?
Do you still have your Autels? Did they ever fix the crabbing issues, with Firmware updates? I have several DJI drones, AIR 2S, Mini 3, Mini 3 Pro, Mini 4 Pro, AIR 3 & FPV Drone. I just bought the Evo Lite + Premium Bundle & im contemplating sending it back. I wanted a non Geofenced drone, with a decent quality camera. But I've heard a lot of nightmare stores about Autels customer service, being pretty much non-existent. I would hate to open it up, & have my drone have issues that Autel wont help with.
Great video Chris. Wouldn't have been able to repair my gimbal cable without it. The only problem is that I tore the barometer cable in the process! Do you know where I can get one? I've tried Hubsan & Ali Express with no luck.
Email me a picture showing both sides of the cable so I can see which yours is and I’ll see what I can do. qcguy.chris@gmail.com
I like your vidio ser...
Thanks Chris, I truly appreciate this video. Even the dropped/missing screw is informative, you showed not only how to replace the arm but all the little irritations that go on when doing these finicky jobs. Great video.
that drone is Slow -_- Faith Mini 2 can do 14 meters a second in sport mode -_-
how to know if the cables are broken?
Gimbal codes will appear in the app
@@QCGUY no wifi..always flashing red sir
@@crisdeeclavel7772 original zino?
@@crisdeeclavel7772 Image cable is almost always the cause of no WiFi.
@@QCGUY yes but i bought it online second hand.. i was fooled
YOU ARE THE ONLY TECH THAT SHOWS THIS. YOU ARE THE BEST. SINCE DJI ARE UP IN THE AIR I WOULD GET MY OTHER FLYERS WORKING. THANK YOU AGAIN.
❤hello sir😊, I like look of hubsan zino 2 plus, thinking of buying one.Q: how many times do you fly it per day, and how long have you owned it for, I am considering this or XMRC11 Turbo from Banggood, would source zino of eBay.😊😊, thanks for any tips. Rob
What about the frontal led cable?
It wasn’t on this model but once you are this far it’s not rocket science to figure out that you just unplug it and remove it. The glue is the biggest obstacle though…
@@QCGUY Yes, I managed to remove it, it was not easy to remove the small board with the LED because it was attached very strongly with glue or double-sided tape. even with the small cable you have to be very careful where there is glue. Thanks for the reply and for your great work
@@QCGUY Hi, I would like some help please. I received the middle frame to reassemble from Aliexpress today, none of the screw holes are threaded. how can I do?
@@stefanogiunti5832 It’s plastic, it will self thread.
How do you perform rth with this setup?
Back in the air with your help - thanks.
Happy to help and happy you were able to get back in the air. ✌️
I am trying to figure out how to change the front arms. The grey wire is difficult to get to. I'm not sure what all has to come apart to fix it.
I have a video for that I haven’t uploaded yet but you remove the two screws inside the battery bay then pop the belly off to get two where the gray antenna wire connects. It just slides through a whole down the side of the drone from the top to the underside.
Has firmware updates helped this drone out? I just ordered the Evo Lite Plus Premium Bundle a few days ago, I have a DJI AIR 3 thst I absolutely love and a DJI Mini 4 Pro, Is the Evo Lite plus comparable to DJI?
How much do you charge to replace mid frame on a mini 2?
qcguy.chris@gmail.com for service inquiries.
Thank you very much ❤️🙏🇹🇷
I have been trying to upgrade FC firmware upgrade using USB to micro cable but unsuccessful. Can I use SD method instead of cable?
my hubsan zino pro always wifi disconnected with in 5 meters. please help to solve the issue sir. thanks
tengo un problema con un zino mini por, la lu roja parpadea todo el tiempo, no conecta con el controlador, mi padre lo golpeo y sustituyo el gimball, funciono veces y ya no conecta con el mando. al encender el drone se ,mueve la camara, pero aveces erraticamente, no se que solucion existe
You have a damaged WiFi module or it’s cable failed is likely the problem.
Would be nice if i can find a video that shows how to get the audio file from screen recording. I get the screen recording video and hear audio, but dont have a audio file.
If it’s the dji mic you can get the audio file separately from the mics receiver. If you are trying to add the audio to your higher quality video off the drones file just add the video with audio file and don’t make the lesser quality file visible.
Thank you!!!
Thank you for showing us how to work on our drones incredibly interesting
Is a 30w salder get hot enough
Absolutely 👍🏻
You very kind person and human
You very kind person and human
yeah , don't update your FIRMWARE !!! FIRMWARE ALWAYS GETS DUSTY, WHATS FIRMWARE ?
Where can I buy the piece with the black ring that you showed in the beginning? I need to replace this but cannot find a source for that specific piece.
I don’t know where you are but google rear arm axis joint or hinge for your drone model and you should find one. Aliexpress maybe 🤷♂️
Love the shirt! Fly it like ya stole it! Right on!
My Avata 2 drone lost connection to my goggles and it landed on its own right where it lost the signal instead of RTH. I walked to where I last saw it flying and luckily it connected back to the goggles when I got 1/4 mile away from it. It was a relief to find it. I would walk the grass between your car and that grassy area.
I searched every possible area for days. Long gone and replaced already 👍🏻
Can you attach mic to drone?? Or is it just recording near you?
A mic attached to the drone would be a awful recording of buzzing props and wind.
Damn! That, drifting right, was happening to me with EVO 2 6K Enterprise about a year ago. I checked the log for the flight and it showed no joy stick input. I figured it was a GPS problem because the mountain behind me was blocking half the sky even though it has been rock steady for 25 minutes going up and down that same mountain until the end. Weird.
Can I change the arm only without having to take it all to bits?
Nope 👎🏻 You have to deal with the wires regardless so you have to take it apart to do so plus soldering.
Greetings, excellent friend, try which remote control you are using if you can tell me please.
The remote that comes stock with the drone.
Thank you for a great video presentation, Sir !!! Impressive performance from such a small "beast". We shouldn`t be too demanding from them, as Autel Evo drones are very good, and they do such a great job, it doesn`t matter the model or version. Overall, nice job with the test and feedback provided.
Hey mate, I just made my first flight with my zino and have some difficulties. It is my second Zino, the first one I had around 2020. This one was technically ok, then I made the firmware updates (all without problems) and then after starting / powering up the drone the gimbal makes strange sounds keeping the camera pointed up and it just only stop these noises and centers the camera when I move the copter a bit. Do you know that problem? Not the same as in your video here but I saw alot of vidz from you over the time with alot of zino stuff so I hope I have luck :-) Would be happy about any hints. Best regards, Johnston
It’s hard to say exactly just based on what you told me but updates cause the ribbon cable to heat up considerably which can cause them to fail but this would show an error code if that’s the case. It can also just need calibrated or it could have dust/debris in the gimbals axis points.
Can I pair controller from zino mini pro with hubsan zino?
Negative 👎🏻
Thank you so much Chris you’ve helped me so much I don’t know how you do it so quickly, you rock man😊
I do it almost everyday so like anything you improve in time. Thanks 😊
Absolutely mine did. Mine broke.
Damn, you’re good
You are one excellent teacher. Thank you so much. I have both of those drones. I had to take my DGIDJI apart twice replace him back leg. Thank you anyway.
Chris, thanks for your excellent repai on my Exo mini pro. It was very reasonable and finished quicker than I expected.
I'm arriving a bit late but I have a Zino 2+, do you know whether this same recovery firmware would work on that to get it going? I've emailed Hubsan requesting that firmware in case this one isn't the same but no response, and the firmware downloads I see on their site for the Zino 2+ don't reflect anything like that as far as I can tell.
Not the same but all it is is earlier versions of firmware for the drone. Not sure what you’re problem is exactly but the 2+ can be a little more fickle trying to get it unbricked from incomplete firmware uploads.
Thanks for this guide, that what I was looking for. I am wondering, however, exactly what temperature did you set the soldering iron to? And other question: is that electronics grade silicon really necessary? I would appreciate this information.
Lead-based solder: Start at 600°-650°F (316°-343°C) Lead-free solder: Start at 650°-700°F (343°-371°C) The electronic grade silicone is recommended versus just using silicon.
Mine just has a tiny minor collision with a wall for the first time legit wasn’t about 2ft from the ground going 0.5mph and rammed itself into the wall cracking the right front arm 😭 4 day old drone first crash not even bad and that happens
It sucks but hope you got it sorted 😉
Chris, thanks so much for this, I’ve just tried it by turning up the gain and it worked. Mine was on the rc pro, i’ll try the rc in good time. I used +9 gain which seemed okay, quite high in fact for my system, but i’m using the mic2 system so maybe that’s why +10 was ample, no pun …. I’ll mess around with the gain to find the best setting for my gear. Thanks again Chris, this is why I love watching YT, well, for the most part! 👏